According to IMCA, during loading operations the slings failed, causing damage to both sides of the tank bottom.
The incident
Personnel were loading out heavy plant at a land-based location when there was an incident involving failure of slings.
A crew were lifting a large tank with a forklift using nylon slings and shackles from the lifting eyes at the top. The forklift carrying the tank to the trailer had to move over some rough ground and the tank was moving around and bouncing, so spotters were used on both sides.
One sling failed and the tank dropped to the ground on that side. Then another sling failed, causing damage to both sides of the tank bottom, valves, and one leg was bent. There were no injuries.
Work was stopped to regroup and discuss.
Probable cause
The slings broke due to the sharp edges not being protected there would have been high dynamic loads as the load shifted while being manoeuvered over rough ground.
